SYRO Embossing Cylinder System
Description
The SYRO embossing device and control is attached on a metallic frame. The graving of the fibre cement panel happens when it runs through the embossing cylinder and the supporting roll. Optional the embossing cylinder can permanently be cleaned by a brushing system. The cylinder can easily be exchanged by another one. The embossing pressure can individually be adjusted during the graving process.
Application
The SYRO embossing system is dedicated for the fibre cement and CBPB industry.
Advantages
Applicable for fibre cement panels with a thickness of up to 20 mm
Applicable for asbestos and non-asbestos fibre cement
Low installation and adjustment effort
High grade of reproducibility, even over a long period
Manual exchange of the embossing cylinder
Easy maintenance and handling
Advantageous alternative to conventional embossing systems
Assembly
The embossing device and control unit are assembled on a metal frame. The fibre cement plate gets its gravure by its way through the embossing cylinder and support roller. The embossing cylinder is permanently cleaned by dedicated brushes and can easily be replaced by another cylinder with a different gravure. The embossing pressure can be individually changed during the embossing process.
[Check out our laboratory device]
Technical Data
Width of fibre cement plate: | max. 1’500 mm |
Velocity: | 1 m/s bis 2,5 m/s |
Embossing Depth: | 0.5 bis 1.5 mm |
Embossing Cylinder: | 316 mm diameter and 1’500 mm width |
Support Roller: | 316 mm diameter and 1’500 mm width |
Cleaning Brushes (optional) | 250 mm diameter and 1’500 mm width |
Embossing Device: | Frame is adjustable to the local situation; 1 to 3 control units for the |
Embossing Pressure Setting | mechanical or hydraulic device for the embossing pressure setting |
