Öl SYROFORM 'S'
Oil SYROFORM „S“
The SYROFORM S drawing oil consists of an anticorrosion additive and is the most suitable oil for the use with one of the automatic oiling systems of the SYRO HB 2000 series. However, it can be easily used with other oil coating systems as well. SYROFORM S is an exclusivity of SYRO Engineering AG and contains no VOC’s and complies with the latest EU-directives.
Application
It is recommended that the SYROFORM S oil is applied with the SYRO Oiling System HB2000. In delivery state a smooth coating by spraying, brushing or rolling is guaranteed. E.g. in the fibre cement plates production process the moulds are first cleaned and then passed through the SYRO Oiling System HB2000 where they are coated with sufficient oil by atomizing it against the upper and bottom side of the moulds. The coating quantity is approximately 0.5 g/m2 with V = 1.0 m/s.
SYROFORM S is primarily used for the spray coating:
- of running steel or aluminium coils in the steel plate production
- of all kind of steel moulds in the fibre cement plates manufacturing
- of aluminium pressure casting moulds in the concrete roofing tiles manufacturing
Advantages
- clean and effective release
- excellent surface finishing
- no staining on the concrete surface
- good corrosion protection of the templates and ensures long life of your steel moulds
Health and Safety
SYROFORM “S” Oil produces no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene. Additional health and safety information are available on request.
Nominal values
| Colour | Brighter 1,5 | DIN ISO 2049 | |
| Density / 15°C | kg/m3 | 850 | DIN 51757 |
| Viscosity / 20°C | mm2/s | 19 | DIN 51 562 |
| Flash point | °C | > 150 | DIN EN ISO 2592 |
| Pourpoint | °C | < -15 | DIN ISO 3016 |
Oil SYRONOL 732/1
Water-insoluble solvent-free concrete parting agent of the newest generation which is quickly biodegradable according to CEC-L 33-A-94 (test report of Hygiene-Institut, Gelsenkirchen, Germany). SYRONOL 732/1 is ideal for types of shuttering, such as steel, wood, and coated shuttering panels. The product can also be used as mixer protection in devices and in construction vehicles and transporters.
Application
SYRONOL 732/1 can be applied problem-free in the state at time of supply by spraying, brushing or rolling. Years of field experience show that SYRONOL 732/1 has no negative influence on the further treatment of concrete (cast, tiles, wallpaper, colour) when applied properly. The excellent quality of this product was confirmed by various expert opinions; e.g. by Münchner Baustoff-Prüfung GmbH, Alescco Bauchemie Produkte GmbH and IBQ Ingenieurgesellschaft für Baustoffprüfung und Qualitätssicherung mbH.
SYRONOL 732/1 is primarily used for the spray coating:
- of aluminium pressure casting moulds in the concrete roofing tiles manufacturing
- of running steel or aluminium coils in the steel plate production
- of all kind of steel moulds in the fibre cement plates manufacturing
Advantages
- clean and effective release
- excellent surface finishing
- no staining on the concrete surface
- good corrosion protection of the templates and ensures long life of your steel moulds
Health and Safety
SYRONOL 732/1 oil produces no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene. Additional health and safety information are available on request.
Nominal values
| Colour | 0.5 | DIN ISO 2049 | |
| Density / 15°C | kg/m3 | 840 | DIN 51757 |
| Viscosity / 20°C | mm2/s | 9 | DIN 51 562 |
| Flash point | °C | > 130 | DIN EN ISO 2592 |
| Pourpoint | °C | -15 | DIN ISO 3016 |
| Neutralization value | Mg KOH/g | 6 | DIN 51 588 |
