SYRO Flat Steel Moulds with Stone Pattern
Description
The SYRO structured steel moulds are made of European steel and are produced in Northern Europe. At the moment two different stone pattern are available.
Application
SYRO structured steel moulds are especially dedicated to fibre cement and CBPB manufacturers.
Tolerances
The SYRO structured steel moulds are available in the following dimensions with standard tolerances. Tolerances different to the standard ones must be requested.
| Dimension | Standard Tolerances | |
|---|---|---|
| Length | max. 6’500 mm | +3.0 / -0.0 mm |
| Width | max. 1’750 mm | +3.0 / -0.0 mm |
| Thickness | max. 4.5 mm | +0.2 / -0.2 mm |
| Parallelism | 2.0 mm | |
| Embossing Deepness | ≤1.0 mm |
Steel Grades
The SYRO structured steel moulds are available in hot rolled carbon steel:
| Black Hot Rolled Steel (blued surface) | Tensile Strength | Yield Strength (min) | Elongation (min) |
|---|---|---|---|
| S235 (ST37-2) |
Stone Pattern
